MODUL čtečky a zapisovače karet RFID IC

Modul M2 je 13,56mhz vysokofrekvenční modul pro čtení a zápis, který má vlastní CPU řízení bez sekundárního programování, kompletní sériový transceiver bez načítání jakéhokoli ovladače a lze jej bez problémů propojit s jakýmkoli systémem. Integrovaná palubní RÁDIO frekvenční anténa má stabilnější výkon, což je velmi vhodné pro nabíjecí poštu, samoobslužný prodej a reklamu integrovaného stroje.

Specifications:


ItemParameter
Frequency13.56MHZ
ProtocolISO/IEC 14443 TypeA
Support CardsMifare(1K/4K); NXP S50,NXP S70; F08
Working VoltageDC +5V(Allow user to customize 3.3V)
Working Current60mA
Communication InterfaceRS232/USD/UART TTL
Baud Rate9600bps or 115200bps etc.
Communication Speed<100ms
Operating SystemWindows, Linux, Android, Vista
Weight5g
Working EnvironmentTemperature (-20℃~85℃); Humidity (5%-95%)
Size50 mm x 31.5 mm; Thickness of 1.2 mm
Sensing Sistance3-5cm
State of alertLED indicator light, controllable buzzer


Features:


◆The module is small in size, easy to install, widely used and easy to develop.

◆The built-in CPU control does not require the user to edit the program twice, and the IC card can be easily operated  through the serial port protocol.

◆Complete serial port control, can be seamlessly connected with any system, no need to install additional drivers, only need to connect VCC, TX, RX, GND four lines to communicate.

◆Ultra-wide voltage (3.3V/5V) is optional, and 5V power supply is used as standard, which can meet the output voltage of the serial port of most development boards.

◆Humanized design, the buzzer can be controlled as a reminder action, and the on-board power LED light is convenient to check the power-on status.

◆Complete functions, clear development protocol, support IC card read and write operations, sector encryption, CPU can store 50 characters as flash backup data.

◆Support mode switching, read-only or read-write mode settings, three output formats can be switched in read-only mode.


INQUIRY

Scan the qr codeclose
the qr code